We’ll keep your electrical parts intact while removing coatings and contaminants through selective laser micro-ablation. Here’s how to get started:
When you need to remove parylene or other coatings from a delicate surface, sometimes the only way is selective laser micro-ablation.
With careful laser power control and beam shaping, we’ll remove the coatings or contaminants you don’t want without damaging the material underneath.
Through our selective laser micro-ablation service, we:
- Remove thin films, thick films, electrical insulation or contaminants.
- Ablate buffer coating or cladding on optical fibers.
- Strip off parylene without damaging the underlying materials.
- Target the exact regions of interest on your parts
From a single part to high-volume micro-ablation, our team can complete the project quickly and efficiently. Start working with us today.
Primarily Used for Electronics, Selective
Laser Ablation Removes Micro-Insulation
to Expose an Underlying Electrical
Conductor Without Damage
Our Precise Process
01.
Tell Us
the Problem
From a single component to high-volume production, we can carefully strip away the materials you don’t need to bring you the best results.
02.
Plan
The Project
Through a screenshare with a “MicroFabulous” engineer, we’ll discuss the best way to accomplish your project and the possible timelines for production.
03.
Get a
Quick Quote
We know that waiting for a quote can extend your timeline and leave you in the dark. We’ll provide you with a quick quote based on our decades of experience in micro-manufacturing.
Laser Micro-Cutting
Lasers on the cutting edge with precision to a micron or less on a variety of materials and shapes, from sheets, tubing, spheres, and more.
Laser Micro-Drilling
We create thru-holes and blind holes in just about every type of material that exists. Either millions of microscopic holes or even just one very precise hole.
Laser Micro-Welding
Join similar or dissimilar materials on a micro-scale with laser soldering and brazing for microscopic parts.
Laser Surface Modification
Add micron-level texture to your materials with precision, preventing corrosion and wear with tribological laser surface modification.
Laser Micro-Marking
Used throughout the electronics industry, Laser Marking and Scribing is quick, efficient, and precise.
Laser Micro-Milling
Remove microns of material along a path with laser machining for microfluidic and fiber optic applications.
Artificial Defects
Test your defect detection equipment during QA/QC with artificial defects laser-cut, drilled, or channeled in a specific location or pattern.
Don’t Worry About Damaging Components With Selective Laser Micro-Ablation.
You have insulated electrical components that can’t connect like they should: the parylene is difficult to mask or remove without damaging your parts.
But not with our laser techniques.
Through selective laser micro-ablation, we inspect your part under a video microscope and precisely remove the undesired material with a laser, so you can make connections, repair or reuse the part. From a single part to high-volume production, we’ll get the job done quickly, so you can get back to work.
Here’s our proven process for precision:
1
First, send us your drawings. While a CAD drawing is always the most helpful, our team of engineers can take your napkin sketch or PowerPoint and turn it into a usable, repeatable manufacturing process. Of course, we sign any required NDAs to protect your intellectual property.2
Next, we plan the project. In a meeting on-site or online, we’ll discuss the best way to accomplish your project on time and within budget.3
Finally, you’ll get a quick quote or proposal based on our decades of experience, so you’re not waiting around to learn how much the project will cost or how long it will take.So trust the team that’s been maintaining these tolerances for decades, and share your plans to get started.
